Development and validation of a prototype of a manual intra-row mechanical weeder in vegetable beds
Abstract
Aim of study: The present work addresses aspects related to the development of a prototype of a weeder capable of managing invasive plants in vegetable beds.
Area of study: The investigation was performed in the Federal Rural University of Rio de Janeiro, Seropédica (Brazil).
Material and methods: The methodology was divided into defined steps from planning and conceptual design, obtaining preliminary and detailed designs, to evaluating the performance of the physical prototype. The variant considered most appropriate was selected according to the project’s feasibility index and was chosen for the development of the preliminary design and detailed design.
Main results: Based on the results obtained, it can be stated that the concepts used, and the prototype developed were functional and innovative for weed control in a lettuce crop, enabling the mechanical removal of weeds from 70.3% of the plants and increasing the working area by 49.3%. This indicates improved efficiency in the vegetable production process in raised beds.
Research highlights: The developed and validated mechanical weeder prototype allowed efficient weed removal and greater operational efficiency during lettuce cultivation in raised beds.
Downloads
References
Adetola AO, 2019. A Review on the Performances of Weeding Machines. Futojnls 5(2): 109–123. www.futojnls.org
Almeida LFM, Conforto EC, Silva SL, Amaral DC, 2012. Fatores críticos da agilidade no gerenciamento de projetos de desenvolvimento de novos produtos. Prod & Prod 13(1): 93–113. https://doi.org/10.22456/1983-8026.24824
Annamanai S, Manivel P, Prakasam JR, Kishore GM, Karunakaran S, 2020. Design analysis and investigation of fabricated weeder for tapioca farm. Int Jou of Mech Eng Tech 11(2): 81–91. http://www.iaeme.com/IJMET/issues.asp
Bhavin R, Khardiwar MS, Kumar S, Solanki BP, 2016. Performance evaluation of manual operated single row weeder for groundnut crop. Engg. & Tech. in India 7(1): 45–52. https://doi.org/10.15740/HAS/ETI/7.1/45-52
Brown B, Gallandt ERA, 2018. A systems comparison of contrasting organic weed management strategies. Weed Sci 66(1): 109–120. https://doi.org/10.1017/wsc.2017.34
Carvalho DF, Silva DG, Rocha HS, Almeida WS, Sousa ES, 2013. Evapotranspiration and crop coefficient for potato in organic farming. Eng Agríc (1): 201–211. https://doi.org/10.1590/S0100-69162013000100020
Costa NV, Rodrigues-Costa ACP, Coelho EMP, Ferreira SD, Barbosa JA, 2018. Methods of weed control in organic systems: a short review. Rev Bras Herb 17(1): 25–44. https://doi.org/10.7824/rbh.v17i1.522
Chang CL, Xie BX, Chung SC, 2021. Mechanical control with a deep learning method for precise weeding on a farm. Agriculture 11: 1049. https://doi.org/10.3390/agriculture11111049
Devanathana C, DineshKumara PT, Selvaramkumara A, Girib R, Dhandapania S, 2021. Design and development of cost effective agricultural weeder. Mater Today Proc 47: 6590–6593. https://doi.org/10.1016/j.matpr.2021.04.635
Embrapa, 2006. Sistema brasileiro de classificação de solos. Embrapa Solos, Rio de Janeiro, BRA. 306 pp.
Failla S, Pirchio M, Sportelli M, Frasconi C, Fontanelli M, Raffaelli M, Peruzzi A, 2021. Evolution of Smart Strategies and Machines Used for Conservative Management of Herbaceous and Horticultural Crops in the Mediterranean Basin: A Review. Agronomy 11: 106. https://doi.org/10.3390/agronomy11010106
Fennimore SA, Slaugther DC, Siemens MC, Leon RG, Saber MN, 2016. Technology for Automation of Weed Control in Specialty Crops. Weed Technol 30(4): 823–837. https://doi.org/10.1614/WT-D-16-00070.1
Grupioni CM de F, Santos FL, Fernandes FL, Fernandes FC, Valente DSM, Pinto FA de C, 2018. Development and evaluation of operational performance of macaw fruits semi-mechanized harvester by means of mechanical vibrations principle. Semina 39(2): 497–510. https://doi.org/10.5433/1679-0359.2018v39n2p497
Grzebieluckas C, Buson MA, Queiroz SG, Ensslin L, Ensslin S, Nickel E, Balbim EJ, 2011. Instrument for identifying consumer needs in the design development process: the case of an automobile design. Gest Prod 18(2): 337–350. https://doi.org/10.1590/S0104-530X2011000200009
Guru PK, Patel SP, Nayak AK, Kumar A, Lal B, Gautam P, 2018. Development and evaluation of power operated weeder in rice. Oryza 55(2): 317–323. https://doi.org/10.5958/2249-5266.2018.00039.5
Hussain M, Farooq S, Merfield C, Jabran K, 2018. Mechanical weed control. In: Jabran K, Chauhan BS (eds). Non-chemical weed control. Academic Press, Cambridge, pp. 133–155. https://doi.org/10.1016/B978-0-12-809881-3.00008-5
Jiao JK, Wang ZM, Luo HW, Chen GL, Liu HL, Guan J, Hu L, Zang Y, 2022. Development of a mechanical weeder and experiment on the growth, yield and quality of rice. Int J Agric & Biol Eng 15(3): 92–99. https://doi.org/10.25165/j.ijabe.20221503.6978
Kumar AA, Haribabu B, Rao AS, Someswararo C, 2013. Ergonomical evaluation of manually operated weeder under wet land condition. Sci Res Essays 8(6): 249–255. https://doi.org/10.5897/SRE2012.0752
Kumar R, Govil A, Daga P, Goel S, Dewagan S, 2022. Design of automatic seed sowing machine for agriculture sector. Mater Today Proc 63: 341–346. https://doi.org/10.1016/j.matpr.2022.03.188
Liu C, Yang K, Chen Y, Gong H, Feng X, Tang Z, Fu D, Qi L, 2023. Benefits of mechanical weeding for weed control, rice growth characteristics and yield in paddy fields. Field Crops Res 293: 108852. https://doi.org/10.1016/j.fcr.2023.108852
Machado TA, Fernandes HC, Santos FL, Megguer CA, Velloso NS, 2023. Development of a bulk cargo fruit sampler. Acta Sci Technol 45: e61804. https://doi.org/10.4025/actascitechnol.v45i1.61804
Machleb J, Peteinatos GG, Kollenda BL, Andújar D, Gerhards R, 2020. Sensor-based mechanical weed control: Present state and prospects. Comput Electron Agric 176: 105638. https://doi.org/10.1016/j.compag.2020.105638
Mahmood A, Khaliq A, Ihsan MZ, Naeem M, Daur I, Matloob A, El-Nakhlawy FS, 2015. Estimation of weed dry biomass and grain yield as a function of 48 growth and yield traits under allelopathic weed management in maize. Planta Daninha 33(1): 23–31. https://doi.org/10.1590/S0100-83582015000100003
Melander B, Jabran K, De Notaris C, Znova L, Green O, Olesen JE, 2018. Inter-row hoeing for weed control in organic spring cereals—influence of inter-row spacing and nitrogen rate. Eur J Agron 101: 49–56. https://doi.org/10.1016/j.eja.2018.08.005
Mialhe LG, 1974. Manual de mecanização agrícola. Ed Agron Ceres, São Paulo, BRA. 301 pp.
Moreira RGM, Teixeira MM, Fernandes HC, Cecon PR, Minette LJ, 2013. Development of a mechanical homogenizer coffee. Semina 34(1): 3655–3662. https://doi.org/10.5433/1679-0359.2013v34n6Supl1p3655
Moreira RGM, Teixeira MM, Santos FL, Fernandes HC, Cecon PR, 2016. Preliminary design of a coffee harvester. Semina 37(5): 2933–2946. https://doi.org/10.5433/1679-0359.2016v37n5p2933
Naruhn G-P, Peteinatos GG, Butz AF, Möller K, Gerhards R, 2021. Efficacy of Various Mechanical Weeding Methods—Single and in Combination—In Terms of Different Field Conditions and Weed Densities. Agronomy 11: 2084. https://doi.org/10.3390/agronomy11102084
Pahl G, Beitz W, Feldhusen J, Grote KH, 2005. Projeto na engenharia: fundamentos do desenvolvimento eficaz de produção – métodos e aplicações. Edg Blucher, São Paulo, BRA. 411 pp.
Pallottino F, Menesatti P, Figorilli S, Antonucci F, Tomasone R, Colantoni A, Costa C, 2018. Machine Vision Retrofit System for Mechanical Weed Control in Precision Agriculture Applications. Sustainability 10(7): 2209. https://doi.org/10.3390/su10072209
Pereira W, Melo WL, 2008. Manejo de plantas espontâneas no sistema de produção orgânica de hortaliças. 62: 1–8. https://ainfo.cnptia.embrapa.br/digital/bitstream/CNPH-2009/34841/1/ct_62.pdf [Mar 14, 2024].
Ragesh KT, Jogdand SV, Victor VM, 2018. Field Performance Evaluation of Power Weeder for Paddy Crop. Curr Agri Res 6(3): 441–448. http://dx.doi.org/10.12944/CARJ.6.3.24
Saha KK, Hossain A, Hoque MA, Jahan MAHS, Ahmed S, Timsina J, 2021. Development and Performance Evaluation of a Two-Wheeled Power-Tiller Multi-row Weeder. J Biosyst Eng 46: 36–47. https://doi.org/10.1007/s42853-021-00086-x
Saleh A, Suleiman ML, 2021. Design, Construct and Evaluation of a Single Row Hand-Pushed Mechanical Weed Control Machine. J Appl Sci Environ Manage 25(3): 401–406. https://dx.doi.org/10.4314/jasem.v25i3.14
Santos SS, Espíndola JAA, Guerra JGM, Leal MAA, Ribeiro RLD, 2012. Production of organically grown onions depending on the use of mulch and castor bean cake. Hortic Bras 30(3): 549–552. https://doi.org/10.1590/S0104-530X2012000100007
Sediyama MAN, Santos IC, Lima PC, 2014. Growing vegetables in the organic system. Ceres 61: 829–837. https://doi.org/10.1590/0034-737x201461000008
Sediyama MAN, Santos IC, Lima PC, 2014. Cultivo de hortaliças no sistema orgânico. Ceres 61: 829–837. https://doi.org/10.1590/0034-737x201461000008
Severo RF, Bender ARK, Boelter NM, 2014. Relationship between the design influencing factors and the functional structure of a cassava peeling machine. Cienc Rural 44(9): 1568–1573. https://doi.org/10.1590/0103-8478cr20121024
Silva JR, Chabaribery D, 2006. Coeficientes técnicos e custo de produção da mandioca para mesa na região de Mogi Mirim, Estado de São Paulo. Inf Econ 36(1): 26–32.
Silva AF, Ferreira EA, Concenço G, Ferreira FA, Aspiazu I, Galon L, Sediyama T, Silva AA, 2008. Effect of weed densities and control periods on soybean yield components. Planta Daninha 26(1): 65–71. https://doi.org/10.1590/S0100-83582008000100007
Silva D, Santos JB, Ferreira EA, Silva AA, França AC, Sediyama T, 2012. Weed management in Cassava. Planta Daninha 30(4): 901–910. https://doi.org/10.1590/S0100-83582012000400025
Tejas B, Raut SP, Wagh GVG, 2019. Review Paper on Power Weeder. Int J Sci Dev Res 4(3): 375–377. https://www.ijsdr.org/papers
Van Loon J, Woltering L, Krupnik TJ, Baudron F, Boa M, Govaerts B, 2020. Scaling agricultural mechanization services in smallholder farming systems: Case studies from sub-Saharan Africa, South Asia, and Latin America. Agricultural Systems 180: 102792. https://doi.org/10.1016/j.agsy.2020.102792
Woyessa D, 2022. Weed Control Methods Used in Agriculture. Am J Life Sci Innov 1(1): 19–26. https://doi.org/10.54536/ajlsi.v1i1.413
Woyessa D, Olaniyan AM, 2023. Design and Development of an Engine-Operated Weeding Machine for Wheat Farm. Am J Innov Sci Eng 2(1): 93–105. https://doi.org/10.54536/ajise.v2i1.1147
Zawada M, Legutko S, Gościańska-Łowińska J, Szymczyk S, Nijak M, Wojciechowski J, Zwierzyński M, 2023. Mechanical Weed Control Systems: Methods and Effectiveness. Sustainability 15(1): 15206. https://doi.org/10.3390/su152115206
Copyright (c) 2025 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
