Design and development of a chickpea stripper harvester
Resumen
Saving cost and time was a motivation to develop a mechanized harvesting system for chickpeas, which are manually uprooted on fallow fields in developing countries. A tractor-pulled harvester with a modified stripper header was designed and fabricated, in which passive fingers with V-shaped slots removes chickpea pods from anchored plant; batted reel sweeps the pods across the platform. Field experiments were conducted to determine the effect of slot width and reel speed on machine performance in terms of harvesting losses. Minimal losses were found when the design was configured with a slot width of 4 cm, reel speed of 50 rpm and reel kinematic index of 1.6. The prototype harvester with a 1 m working width produced the work rate of 0.18 ha h-1 and exhibited acceptable working quality. The main conclusion is that the modified stripper harvester can work in unevenness ground where other machines cannot operate.Descargas
Citas
Bansal RK, Sakr B, 1992. Development of a vertical conveyor reaper for harvesting chickpeas and lentils in Morocco. Appl Eng Agr 8(4): 425-428. http://dx.doi.org/10.13031/2013.26087
Behroozi-Lar M, Huang BK, 2002. Design and development of chickpea combine. Ama-Agr Mech Asia AF 33(1): 35-38.
Chakraverty A, Mujumdar AS, Raghavan GSV, Ramaswamy HS, 2003. Handbook of postharvest technology cereals, fruits, vegetables, tea, and spices. Marcel Dekker Inc, NY.
Golpira H, 2013. Conceptual design of a chickpea harvesting header. Span J Agric Res 11(3): 635-641. http://dx.doi.org/10.5424/sjar/2013113-3728
Haffar L, Singh KB, Birbari W, 1991. Assessment of chickpea grain quality and losses in direct combine harvesting. T ASABE 34(1): 9-13.
Hanna HM, Quick GR, 2007. Grain harvesting machinery design. In: Handbook of farm, dairy and food machinery (Kutz M, ed). William Andrew Inc., Delmar, NY, pp: 93-111. http://dx.doi.org/10.1016/B978-081551538-8.50007-8
Konak M, Carman K, Aydin C, 2002. Physical properties of chickpea seeds. Biosyst Eng 82(1): 73-78. http://dx.doi.org/10.1006/bioe.2002.0053
Kutzbach HD, Quick GR, 1999. Harvesters and threshers grain. In: CIGR Handbook of Agricultural Engineering, Vol. III, Plant production engineering. The International Commission of Agricultural Engineering, ASAE, St Joseph, MI, USA.
Rovira-Mas F, Zhang M, Hansen AC, 2010. Mechatronics and intelligent systems for off-road vehicles. Springer, NY. PMid:22163522 PMCid:PMC3231084
Sidahmed MM, Jaber NS, 2004. The design and testing of a cutter and feeder mechanism for the mechanical harvesting of lentils. Biosyst Eng 88(3): 295-304. http://dx.doi.org/10.1016/j.biosystemseng.2004.04.002
Siemens MC, 2006. Effect of guard spacing, guard attachments and reel type on chickpea harvesting losses. Appl Eng Agr 22(5): 651-657. http://dx.doi.org/10.13031/2013.21997
Srivastava AK, Goering CE, Rohrbach RP, Buckmaster DR, 2006. Grain harvesting. In: Engineering principles of agricultural machines, 2nd ed. ASABE, St. Joseph, MI, USA, pp: 403-436. http://dx.doi.org/10.13031/2013.41474
Tado CJM, Wacker P, Kutzbatch HD, Suministrado DC, 1998. Development of stripper harvesters: a review. J Agr Eng Res 71: 103-112. http://dx.doi.org/10.1006/jaer.1998.0318
© CSIC. Los originales publicados en las ediciones impresa y electrónica de esta Revista son propiedad del Consejo Superior de Investigaciones Científicas, siendo necesario citar la procedencia en cualquier reproducción parcial o total.
Salvo indicación contraria, todos los contenidos de la edición electrónica se distribuyen bajo una licencia de uso y distribución “Creative Commons Reconocimiento 4.0 Internacional ” (CC BY 4.0). Consulte la versión informativa y el texto legal de la licencia. Esta circunstancia ha de hacerse constar expresamente de esta forma cuando sea necesario.
No se autoriza el depósito en repositorios, páginas web personales o similares de cualquier otra versión distinta a la publicada por el editor.