Distribution, fractionation and mobility assessment of heavy metals in a spiked soil using a multi-species soil system
Abstract
The concentration, distribution and fractionation of metals in a metal spiked soils were studied using a Multi-Species-Soil-System (MSx3), a terrestrial microcosms that allows a combined assessment of the chemical fate and effects on terrestrial organisms. Samples of a natural soil were spiked with a mixture of the metals Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn and placed on the top of soil columns simulating the heavy metal concentration due to an agricultural organic amendment (manure, sewage sludge) equivalent to 2, 5 and 10 times the original background of soil metal concentration. After 21 days exposure, metal mobility was assessed using three complementary approaches: the metal concentrations at four depths in the soil profiles (I, II, III and IV), the metal fractionation in the top soil and the percent metal detected in leachates. The upper soil profile had the highest metal concentration for the majority of the metals. For Cd, Mn and Co highest concentrations were in the bottom profile. Maximum metal mobility in leachates was for Cd (24.67%) >Co (3.65%) >Mn (3.18%) >Zn (0.55%) > and Cu (0.012%). Nickel and Cr percentages were ,0.1%. Lead mobility from soil to water was 0.004% and 0.008% for the lowest and highest treatments, respectively.Downloads
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read here the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.