Development of a doorframe-typed swinging seedling pick-up device for automatic field transplantation
Abstract
A doorframe-typed swing seedling pick-up device for automatic field transplanters was developed and evaluated in a laboratory. The device, consisting of a path manipulator and two grippers, can move the pins slowly to extract seedlings from the tray cells and return quickly to the pick-up point for the next extraction. The path manipulator was constructed with the creative design of type-Ⅱ mechanism combination in series. It consists of an oscillating guide linkage mechanism and a grooved globoidal cam mechanism. The gripper is a pincette-type mechanism using the pick-up pins to penetrate into the root mass for seedling extraction. The dynamic analysis of the designed seedling pick-up device was simulated with ADAMS software. Being the first prototype, various performance tests under local production conditions were conducted to find out the optimal machine operation parameters and transplant production conditions. As the gripper with multiple fine pins was moved by the swing pick-up device, it can effectively complete the transplanting work cycle of extracting, transferring, and discharging a seedling. The laboratory evaluation showed that the pick-up device equipped with two grippers can extract 80 seedlings/min with a 90% success and a 3% failure in discharging seedlings, using 42-day-old tomato plantlets. The quality of extracting seedlings was satisfactory.
Downloads
References
Brewer HL, 1994. Conceptual modeling automated seedling transfer from growing trays to shipping modules. T ASAE 37(4): 1043-1051. http://dx.doi.org/10.13031/2013.28174
Choi WC, Kim DC, Ryu IH, Kim KU, 2002. Development of a seedling pick-up device for vegetable transplanters. T ASAE 45(1): 13-19. http://dx.doi.org/10.13031/2013.7864
Cui W, Fang X, Zhao L, Song J, Lin J, Dong X, 2013. Structural optimization and experimental verification of geared five-bar linkage seedling pick up device. T CSAM 44(8): 74-77.
FMC, 2014. FUTURA transplanter. Ferrari Machine Company, Guidizzolo, Italia. Available in http://www.ferraricostruzioni.com/documenti/download/FUTURA.pdf. [14 October 2014].
Kumar GV Prasanna, Raheman H, 2008. Vegetable transplanters for use in developing contries-a review. Int J Vege Sci 14(3): 232-255. http://dx.doi.org/10.1080/19315260802164921
Kumar GV Prasanna, Raheman H, 2011. Development of a walk-behind type hand tractor powered vegetable transplanter for paper pot seedlings. Biosyst Eng 110(2): 189-197. http://dx.doi.org/10.1016/j.biosystemseng.2011.08.001
Mao H, Han L, Hu J, Kumi F, 2014. Development of a pincette-type pick-up for automatic transplanting of greenhouse seedlings. Applied Engineering in Agriculture 30(4): 547-556. http://dx.doi.org/10.13031/aea.30.10550
MAPRC, 2011. National vegetable industry development plan (2011-2020). The Ministry of Agriculture of PRC. Available in http://wenku.baidu.com/view/70240680ec3a87c24028c42a.html. [17 August 2014]. [In Chinese].
MAPRC, 2012. General rule for vegetable plug transplants production (NY/T 2119-2012). The Ministry of Agriculture of PRC. Available in http://www.doc88.com/p-9992985721834.html. [2 April 2014]. [In Chinese].
Rothbart HA, 2004. Cam design handbook. McGraw-Hill Co. Inc, NY, USA. Available in http://www.doc88.com/p-90654765929.html [10 April 2014].
Ryu KH, Kim G, Han JS, 2001. Development of a robotic transplanter for bedding plants. Agric Eng Res 78(2): 141-146. http://dx.doi.org/10.1006/jaer.2000.0656
Shaw LN, 1993. Changes needed to facilitate automatic field transplanting. HortTech 3(4): 418-420.
Tian K, Mao H, Hu J, Han L, Miao X, He J, 2014. Design and experimental study on the door-shaped picking seedling mechanism of auto-transplanter. J Agric Mech Res 2(2): 168-172.
Tsuga K, 2000. Development of fully automatic vegetable transplanter. Japan Agric Res Quart 34: 21-28.
Yang Y, Ting KC, Giacomelli GA, 1991. Factors affecting performance of sliding-needles gripper during robotic transplanting of seedlings. T ASAE 7(4): 493-498. http://dx.doi.org/10.13031/2013.26251
Ye B, Liu A, Yu G, Luo C, 2013. Parameters optimization with human-computer interaction method and experiment of vegetable seedling pick-up mechanism. T CSAM 44(2): 57-62.
Yu G, Liu B, Zhao Y, Sun L, Xie Y, 2011. Kinematic principle analysis of transplanting mechanism with planetary elliptic gears in automatic vegetable transplanter. T CSAM 42(4): 53-57.
Yu Y, Luo X, Yu G, Zhao X, Yu T, 2013. Parameters optimization of pick-up mechanism of planetary gear train with ellipse gears and incomplete non-circular gear. T CSAM 44(6): 62-68.
Zhang Z, Cao W, Wang Q, Zhang P, 2013. Development status and prospect of plug seedlings automatic transplanting machine. J Agric Mech Res 5(5): 237-241.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
