Comparative performance analysis of innovative separation chamber configurations: Numerical and experimental investigations
Abstract
Aim of study: Novel configurations of separation chamber are proposed to resolve the critical issue of separation in agro-industrial equipment.
Area of study: Dept. of Mechanical and Biosystems Engineering, Urmia, Iran
Material and methods: Precise and instrumented experimentation has been conducted to calibrate the computational fluid dynamics (CFD) methodology in the modeling and simulating chickpea pod separation. Mechanisms were selected based on optimizing separation efficiency, relative purification and required airflow as a criterion for energy consumption.
Main results: Applying a guiding blade and suction fans may potentially increase the separation efficiency while reducing the relative purification and required airflow. The highest separation efficiency (95%), the lowest required airflow (545 m³/h) and the lowest pressure drop (16.3 Pa), were obtained by such configuration. Furthermore, the highest relative purification of 90% was achieved when the mechanism was free of blade and fans.
Research highlights: To integrate the advantages of the above-mentioned configurations, a series-type assembling them is proposed to preserve the separation efficiency and relative purification at the highest level, meanwhile reducing the required airflow. Also, 15% enhancement in the separation efficiency and 302.8 m³/h reductions in the airflow were found as a crucial finding. The high correlation of experimental and theoretical CFD results is the key point to motivate the researchers for extension of similar case projects.
Downloads
References
Ansys Fluent, 2013. Ansys Fluent Theory Guide. Release 18.2 15317, pp: 373-464.
Burtally N, King PJ, Swift MR, 2002. Spontaneous air-driven separation in vertically vibrated fine granular mixtures. Science 295: 1877-1879. https://doi.org/10.1126/science.1066850
Chen L, Jin X, Yang L, Du X, Yang Y, 2017. Particle transport characteristics in indoor environment with an air cleaner: The effect of nonuniform particle distributions. Build Simul 10: 123-133. https://doi.org/10.1007/s12273-016-0310-7
Chen L, Wu Y, Dong H, Meng M, Li C, Yan Y, Chen J, 2018. An overview on membrane strategies for rare earths extraction and separation. Sep Purif Technol 197: 70-85. https://doi.org/10.1016/j.seppur.2017.12.053
Chimakurthi SK , Reuss S, Tooley M, Scampoli S, 2018. ANSYS Workbench System Coupling: A state-of-the-art computational framework for analyzing multiphysics problems. Eng Comput 34: 385-411. https://doi.org/10.1007/s00366-017-0548-4
Devarrewaere W, Heimbach U, Foqué D, Nicolai B, Nuyttens D, Verboven P, 2016. Wind tunnel and CFD study of dust dispersion from pesticide-treated maize seed. Comput Electron Agr 128: 27-33. https://doi.org/10.1016/j.compag.2016.08.007
Elsayed Khairy K, Lacor C, 2010. Optimization of the cyclone separator geometry for minimum pressure drop using mathematical models and CFD simulations. Chem Eng Sci 65: 6048-6058. https://doi.org/10.1016/j.ces.2010.08.042
Emami S, Tabil L G, Tyler RT, Crerar WJ, 2007. Starch-protein separation from chickpea flour using a hydrocyclone. J Food Eng 82: 460-465. https://doi.org/10.1016/j.jfoodeng.2007.03.002
Gebrehiwot MG, De Baerdemaeker J, Baelmans M, 2010. Effect of a cross-flow opening on the performance of a centrifugal fan in a combine harvester: Computational and experimental study. Biosyst Eng 105: 247-256. https://doi.org/10.1016/j.biosystemseng.2009.11.003
Gharakhani H, Alimardani R, Jafari A, 2017. Design a new cutter-bar mechanism with flexible blades and its evaluation on harvesting of lentil. Eng. Agric. Environ. Food 10, 198-207. https://doi.org/10.1016/j.eaef.2017.03.001
Golpira H, Tavakoli T, Baerdemaeker JD, 2013. Design and development of a chickpea stripper harvester. Span J Agric Res 11: 929-934. https://doi.org/10.5424/sjar/2013114-3393
Goula AM, Karapantsios TD, Achilias DS, Adamopoulos KG, 2008. Water sorption isotherms and glass transition temperature of spray dried tomato pulp. J Food Eng 85: 73-83. https://doi.org/10.1016/j.jfoodeng.2007.07.015
Ha G, Kim E, Kim Y, Lee J, Ahn Y, Kim D, 2011. A study on the optimal design of a cyclone system for vacuum cleaner with the consideration of house dust. J Mech Sci Technol 25: 689-694. https://doi.org/10.1007/s12206-011-0122-8
Huang AN, Kuo HP, 2017. CFD simulation of particle segregation in a rotating drum. Part I: Eulerian solid phase kinetic viscosity. Adv Powder Technol 28: 2094-2101. https://doi.org/10.1016/j.apt.2017.05.016
Huang AN, Kuo HP, 2018. CFD simulation of particle segregation in a rotating drum. Part II: Effects of specularity coefficient. Adv Powder Technol 29 (12): 3368-3374. https://doi.org/10.1016/j.apt.2018.09.019
Karayel D, Wiesehoff M, Özmerzi A, Müller J, 2006. Laboratory measurement of seed drill seed spacing and velocity of fall of seeds using high-speed camera system. Comput Electron Agric 50: 89-96. https://doi.org/10.1016/j.compag.2005.05.005
Kozołub P, Klimanek A, Białecki RA, Adamczyk WP, 2017. Numerical simulation of a dense solid particle flow inside a cyclone separator using the hybrid Euler-Lagrange approach. Particuology 31: 170-180. https://doi.org/10.1016/j.partic.2016.09.003
Krupińska A, Ochowiak M, Włodarczak S, 2018. Selected aspects of dust removal from gas stream for chamber separators. In: Practical aspects of chemical engineering; Mitkowski PT et al., Elsevier, pp: 217-229. https://doi.org/10.1007/978-3-319-73978-6_15
Lan Y, Kocher MF, Smith JA, 1999. Opto-electronic sensor system for laboratory measurement of planter seed spacing with small seeds. J Agr Eng Res 72: 119-127. https://doi.org/10.1006/jaer.1998.0353
Matin AH, 1991. A guide to design and calculation for industrial hygienists. University of Tehran Press, 34805.
Miller SA, 2014. Mechanical separation techniques. AccessScience, McGraw-Hill Education
Möbius ME, Lauderdale BE Nagel SR, Jaeger HM, 2001. Size separation of granular particles. Nature 414: 270. https://doi.org/10.1038/35104697
Molerus O, Glückler M, 1996. Development of a cyclone separator with new design. Powder Technol 86: 37-40. https://doi.org/10.1016/0032-5910(95)03035-2
Motlagh AM, Rostampour V, Mardani K, 2018. Design, fabrication and evaluation of a short-legged chickpea harvest machine. Iran Biosyst Eng 49: 83-94.
Narasimha M, Brennan MS, Holtham PN, 2012. CFD modeling of hydrocyclones: Prediction of particle size segregation. Miner Eng 39: 173-183. https://doi.org/10.1016/j.mineng.2012.05.010
Olatunde GA, Atungulu GG, Smith DL, 2017. One-pass drying of rough rice with an industrial 915 MHz microwave dryer: Quality and energy use consideration. Biosyst Eng 155: 33-43. https://doi.org/10.1016/j.biosystemseng.2016.12.001
Panasiewicz M, Sobczak P, Mazur J, Zawiślak K, Andrejko D, 2012. The technique and analysis of the process of separation and cleaning grain materials. J Food Eng 109: 603-608. https://doi.org/10.1016/j.jfoodeng.2011.10.010
Panning JW, Kocher MF, Smith JA, Kachman SD, 2000. Laboratory and fıeld testıng of seed spacıng unıformıty for sugarbeet planters. Appl Eng Agr 16: 7-13. https://doi.org/10.13031/2013.4985
Rezvanivand Fanayi A, Nikbakht AM, 2015. A CFD study of the effects of feed diameter on the pressure drop in acyclone separator. Int J Food Eng 11: 71-77. https://doi.org/10.1515/ijfe-2014-0125
Rezvanivand-Fanaei A, Hasanpour A, Nikbakht AM, 2020. Study of the vapor thermo-compressor to reduce energy consumption in the sugar production line using computational fluid dynamics. J Agr Machin 10: 241-253.
Rezvanivand-Fanaei, Nikbakht AM, A, Hasanpour A, 2021. A Computational-Experimental Investigation of Thermal Vapor Compressor as an Energy Saving Tool for the Crystallization of Sugar in a Sugar Processing Plant. J Food Process Eng.
Rong L, Elhadidi B, Khalifa HE, Nielsen PV, Zhang G, 2011. Validation of CFD simulation for ammonia emissions from an aqueous solution. Comput Electron Agric 75: 261-271. https://doi.org/10.1016/j.compag.2010.12.002
Schaldach G, Berndt H, Sharp BL, 2003. An application of computational fluid dynamics (CFD) to the characterisation and optimisation of a cyclonic spray chamber for ICP-AES. J Anal At Spectrom 18: 742-750. https://doi.org/10.1039/b302052e
Scotto di Perta E, Agizza MA, Sorrentino G, Boccia L, Pindozzi S, 2016. Study of aerodynamic performances of different wind tunnel configurations and air inlet velocities, using computational fluid dynamics (CFD). Comput Electron Agric 125: 137-148. https://doi.org/10.1016/j.compag.2016.05.007
Tian J, Ni L, Song T, Olson J, Zhao J, 2018. An overview of operating parameters and conditions in hydrocyclones for enhanced separations. Sep Purif Technol 206: 268-285. https://doi.org/10.1016/j.seppur.2018.06.015
Wei J, Zhang H, Wang Y, Wen Z, Yao B, Dong J, 2017. The gas-solid flow characteristics of cyclones. Powder Technol 308: 178-192. https://doi.org/10.1016/j.powtec.2016.11.044
Wu X, Wang X, Zhou Y, 2018. Experimental study and numerical simulation of the characteristics of a percussive gas-solid separator. Particuology 36: 96-105. https://doi.org/10.1016/j.partic.2017.04.007
Zhan Z, Yaoming L, Jin C, Lizhang X, 2010. Numerical analysis and laboratory testing of seed spacing uniformity performance for vacuum-cylinder precision seeder. Biosyst Eng 106: 344-351. https://doi.org/10.1016/j.biosystemseng.2010.02.012
Zhao Z, Li Y, Chen J, Xu J, 2011. Grain separation loss monitoring system in combine harvester. Comput Electron Agric 76: 183-188. https://doi.org/10.1016/j.compag.2011.01.016
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.